Search results
To use an NBN FTTC (Fibre to the Curb) connection, you need to connect one end of the network cable (red connector) to the "WAN" port in your modem. Connect the other end of the network cable (red connector) to the "Gateway" port in your NBN Connection Device.
In USB, you can view information about devices connected to the modem USB port. In WiFi Mesh overview, you can view information about devices on your Wi-Fi Mesh network, if you've set one up. This guide gives you a general introduction to the modem settings menu.
If you want to change the modem settings, you need to establish a connection to the modem settings menu. List view. Click the network icon. Click the name of your Wi-Fi Hotspot. You'll find the password and default name of the Wi-Fi Hotspot on the back of your modem. Click Connect.
To change SAGEMCOM F@ST 5366 settings you need to open SAGEMCOM F@ST 5366 admin page. To do that you need to check what is SAGEMCOM F@ST 5366 IP address. You will also need SAGEMCOM F@ST 5366 password and default router login.
Page 7: Connectors And Buttons. Meaning WiFi Press 3 seconds to turn WiFi on/off (button) (button) Press to activate WPS pairing mode Press this button to switch the gateway on/off. eir fibre box User Manual Page 7 Sagemcom Broadband SAS document. Reproduction and disclosure prohibited...
Configuration. You may be asked to enter in a username and password. The username is optus and the password is your WiFi password on the magnet. • Next, click on ADSL 2+ Login and enter the OptusNet username and password we sent you. • Need help? Message us 24/7 in My Optus app app.optus.com.au/message or online at optus.com.au/message.
Configure SAGEMCOM F@ST 5366: First, login into your router, if you don't know how to check how to Open Admin Page. Then you should see the configuration panel. Now press on the Start button, choose your Connection type and click Next. Enter the Wi-Fi name and Wi-Fi password.
